1957-1966 Ford "Styleside" Bed Endcap Patch Panels
Having owned their fair share of 1957-1966 Ford F-Series "Styleside" pickups, the guys at New England Speed & Custom saw an immediate need for a production replacement panel for the bed endcaps below the taillight. Produced by Kustom Innovations, NES&C is the exclusive source for these long-awaited timesaving replacement panels. Stamped in the USA on 16-gauge steel and finished in a protective black powdercoat, these panels are produced to OE Ford factory specs. Because of the symmetrical bed design these panels fit both the left and right side. (The Styleside bed was used in the following applications: 1957-1960 F-100, F-250, and F-350 2WD and 4WD, the 1961-1965 F-100, F-250 4WD, the 1961-1966 F-350, the 1962-1963 F-100, F-250 2WD, and the 1966 F-250 4WD.) These high-quality timesaving repair panels retail for $99.95 each and are available exclusively at New England Speed & Custom. For more info on these nifty repair panels and any and all parts and services offered by NES&C check out www.nespeedshop.com or call 860-265-4441.
LMC Truck Goes Digital
LMC Truck is excited to offer this brand new, exclusive, Digital LED Dash Cluster for 1967-1972 Chevy/GMC trucks or SUVs. The new LMC Truck Digital LED Dash Cluster fits perfectly into your stock instrument bezel and is fully programmable to work with any tire size, gear ratio, or transmission. All sending units (except fuel level) are included and clusters are programmed. These new LMC Truck digital clusters come equipped with the following features: a 0 to 255-mph speedometer with odometer, a trip meter, 0-60 time, ¼-mile ET, and high-speed recall, an odometer that's programmable for your vehicle's mileage, a water temp display with a 50 to 350-degree F range, an oil pressure display with a 0 to 99-PSI range, a voltmeter display with a 7 to 25-volt range (no sending unit required), a fuel level display that reads 0 to 99-percent range in 1-percent increments (which works with GM, Ford, Chrysler, VDO and universal sending units), a tachometer (0 to 9,900 rpm) which is compatible with six- or eight-cylinder engines with breaker-point or electronic ignition systems, turn signal, flasher and high-beam indicators, a clock, and last but not least, a limited lifetime warranty! As well as offering this great new Digital LED Dash Cluster they also offer 20 free illustrated full-line parts and accessories catalogs for 1947-2013 Chevrolet and GMC trucks and SUVs, 1948-2013 Ford trucks and SUVs, or 1994-2012 Dodge Ram and Dakota trucks too! For more information on their new Digital LED Dash Cluster or to order a catalog, visit www.LMCTruck.com or call at 800-562-8782.
1963-1972 C10 "Wide Ride" Bolt-In Front Suspension System
Improve your 1963-1972 GM trucks handling, steering, and overall ride quality with No Limit Engineering's "Wide Ride" raised crossmember system. The system features a power rack-and-pinion steering unit, along with a pair of No Limit's Correct-Steer ZG spindles. The replacement crossmember bolts in place of the factory crossmember of your existing OEM frame without cutting or welding. Paired with tubular upper and lower control arms, along with a custom antisway bar and improved camber/caster refinements the Wide Ride system also allows for more crossmember clearance than the factory crossmember. Rounding out this complete front suspension includes new brake calipers and a pair of drilled and slotted 12-inch diameter rotors that feature a double-drilled pattern to accept numerous bolt-circle patterns. For more information visit www.nolimit.net or join them on Facebook at "No Limit Engineering."
Wilwood Aerolite Calipers
Wilwood Disc Brakes has raised the bar with the release of their new Aerolite series of four- and six-piston forged billet aluminum radial mount calipers. Aerolite calipers provide the next level in performance and durability delivering uncompromising and consistent stopping power for the road, track, or back country trail. Designed as an upgrade replacement for the W4AR and W6AR caliper models, the Aerolite incorporates high technology into a five-bolt, triple bridge body design that delivers unmatched strength and clamping efficiency. Base model Aerolite calipers use the standard .650 / 17mm thick W6 and W4 type 6617 pads and use the same mounting dimensions. A new, wide body model has been added to accommodate thicker type 6620 pads with .800 / 20mm thickness for added endurance and wear capability. For more information contact Wilwood Engineering at 805-388-1188 or www.wilwood.com.
Conventional Cooling Fan Spacers for LS Engines
Running a truck-version LS engine in your classic pickup? Stoker's Hot Rod Factory now gives you the option of running a conventional fixed-blade cooling fan. These great new adapters/spacers are available in 13⁄8-inch and 2-inch lengths and thread onto the original truck water pump. Prices start at $49. For more info on these or the complete line of Stoker components call 855-726-7101 or check out www.stokershotrodfactory.com.
1963-1970 Chevy-GMC C20 Eight-Lug Disc Brake Conversion Kits
Designed after their C10 Deluxe System's, Performance Online's 1963-1970 Chevy truck and GMC truck C20 disc brake conversion kits are high quality, yet budget priced. You'll get all the components needed to convert your classic workhorse to disc brakes. POL's 1963-1970 Chevy and GMC truck disc brake conversion kits have great features including stock height or 2½-inch-drop spindles, 12-inch diameter eight-lug rotors, and late-model ball joints and tie-rod ends. These disc brake systems not only upgrade your truck to disc brakes, they use 1971-'87 ball joints and tie-rod ends making future replacements a snap. In addition, these kits offer a lifetime warranty as well. For more info contact Performance Online at 800-638-1703 or www.performanceonline.com.
Earl's O.E. Fuel Line Quick Disconnects
When you're running a late-model engine with factory fuel rails in a performance application, you'll inevitably be faced with the challenge of connecting to AN fuel lines. Fortunately, Earl's Performance Plumbing has the solution with their new Quick Connect Adapter Fittings. The adapters connect to popular GM, Ford, or Chrysler fuel lines and provide a secure connection to -6 and -8 AN fittings. The adapters utilize dual O-ring seals with an OE-style steel inner snap retainer that "clicks" to the original lines. To ensure a secure connection the engineering team at Earl's incorporated a redundant retaining system. There is the factory-style internal retainer along with an external retaining clip to provide safety and peace of mind. In fact, the external stainless steel retainer is tethered to the fitting to ensure it does not get misplaced while disconnected and can even be safety wired for additional security. The adapters are also available in Earl's Ano-Tuff black finish, which provides superior resistance to wear and corrosion. This unique hard anodizing process forms a thick, hard coating that will not de-bond from the aluminum surface over time. Check out www.earls.com or call their tech line at 270-781-9741 for more information.
1954-1955 Chevrolet Truck Hood Emblems Now Available From The Filling Station
The Filling Station, a worldwide provider of classic Chevrolet reproduction parts, announced that it is now selling high-quality reproductions of 1954-1955 First Series Chevrolet truck hood emblems. 1954-1955 hood emblems are a highly sought after finishing piece for restorers that have been unavailable for many years. This striking polished stainless steel emblem features finely painted details and includes all mounting hardware. Order Part #TR-680 for $219.50 each. The Filling Station is dedicated to helping the Chevrolet enthusiast with their nearly 400-page catalog that contains over 23,000 parts for 1916-1964 Chevrolet cars and 1918-1987 Chevrolet and GMC trucks. They have provided quality reproduction parts to restorers and street rodders since 1979. If you would like more information about products offered by The Filling Station, please call 800-841-6622 or visit www.fillingstation.com.
Premier Street Rods' 1947-1953 Chevy Cabs With Recessed Firewalls
On the tail of Premier Street Rods' hugely successful early Chevy cab assemblies, they're now building and offering these high-quality all-steel 1947-53 cab assemblies with recessed firewalls installed at the time of assembly. The recessed firewall cab versions now allow you to purchase these cabs in either popular configuration. The recessed firewall conversion is a $400 option bringing the total for a complete recessed firewall cab to $7,395. For more info contact Premier Street Rods at 866-605-7637 or www.premierstreetrod.com.