1957-1966 Ford "Styleside" Bed Endcap Patch Panels

Having owned their fair share of 1957-1966 Ford F-Series "Styleside" pickups, the guys at New England Speed & Custom saw an immediate need for a production replacement panel for the bed endcaps below the taillight. Produced by Kustom Innovations, NES&C is the exclusive source for these long-awaited timesaving replacement panels. Stamped in the USA on 16-gauge steel and finished in a protective black powdercoat, these panels are produced to OE Ford factory specs. Because of the symmetrical bed design these panels fit both the left and right side. (The Styleside bed was used in the following applications: 1957-1960 F-100, F-250, and F-350 2WD and 4WD, the 1961-1965 F-100, F-250 4WD, the 1961-1966 F-350, the 1962-1963 F-100, F-250 2WD, and the 1966 F-250 4WD.) These high-quality timesaving repair panels retail for $99.95 each and are available exclusively at New England Speed & Custom. For more info on these nifty repair panels and any and all parts and services offered by NES&C check out www.nespeedshop.com or call 860-265-4441.

LMC Truck Goes Digital

LMC Truck is excited to offer this brand new, exclusive, Digital LED Dash Cluster for 1967-1972 Chevy/GMC trucks or SUVs. The new LMC Truck Digital LED Dash Cluster fits perfectly into your stock instrument bezel and is fully programmable to work with any tire size, gear ratio, or transmission. All sending units (except fuel level) are included and clusters are programmed. These new LMC Truck digital clusters come equipped with the following features: a 0 to 255-mph speedometer with odometer, a trip meter, 0-60 time, ¼-mile ET, and high-speed recall, an odometer that's programmable for your vehicle's mileage, a water temp display with a 50 to 350-degree F range, an oil pressure display with a 0 to 99-PSI range, a voltmeter display with a 7 to 25-volt range (no sending unit required), a fuel level display that reads 0 to 99-percent range in 1-percent increments (which works with GM, Ford, Chrysler, VDO and universal sending units), a tachometer (0 to 9,900 rpm) which is compatible with six- or eight-cylinder engines with breaker-point or electronic ignition systems, turn signal, flasher and high-beam indicators, a clock, and last but not least, a limited lifetime warranty! As well as offering this great new Digital LED Dash Cluster they also offer 20 free illustrated full-line parts and accessories catalogs for 1947-2013 Chevrolet and GMC trucks and SUVs, 1948-2013 Ford trucks and SUVs, or 1994-2012 Dodge Ram and Dakota trucks too! For more information on their new Digital LED Dash Cluster or to order a catalog, visit www.LMCTruck.com or call at 800-562-8782.

1963-1972 C10 "Wide Ride" Bolt-In Front Suspension System

Improve your 1963-1972 GM trucks handling, steering, and overall ride quality with No Limit Engineering's "Wide Ride" raised crossmember system. The system features a power rack-and-pinion steering unit, along with a pair of No Limit's Correct-Steer ZG spindles. The replacement crossmember bolts in place of the factory crossmember of your existing OEM frame without cutting or welding. Paired with tubular upper and lower control arms, along with a custom antisway bar and improved camber/caster refinements the Wide Ride system also allows for more crossmember clearance than the factory crossmember. Rounding out this complete front suspension includes new brake calipers and a pair of drilled and slotted 12-inch diameter rotors that feature a double-drilled pattern to accept numerous bolt-circle patterns. For more information visit www.nolimit.net or join them on Facebook at "No Limit Engineering."

Wilwood Aerolite Calipers

Wilwood Disc Brakes has raised the bar with the release of their new Aerolite series of four- and six-piston forged billet aluminum radial mount calipers. Aerolite calipers provide the next level in performance and durability delivering uncompromising and consistent stopping power for the road, track, or back country trail. Designed as an upgrade replacement for the W4AR and W6AR caliper models, the Aerolite incorporates high technology into a five-bolt, triple bridge body design that delivers unmatched strength and clamping efficiency. Base model Aerolite calipers use the standard .650 / 17mm thick W6 and W4 type 6617 pads and use the same mounting dimensions. A new, wide body model has been added to accommodate thicker type 6620 pads with .800 / 20mm thickness for added endurance and wear capability. For more information contact Wilwood Engineering at 805-388-1188 or www.wilwood.com.