Fresh Foundations

JW Rod Garage now offers complete replacement frames for 1948-1952 and 1953-1956 Ford Trucks. The frames are made of fully TIG-welded 10-gauge steel and are outfitted with Mustang II-style front crossmembers, tubular center sections, rear coilover crossmembers, and body mounts. For more info on these high-quality frame assemblies contact, JW Rod Garage at 888-414-8787, or check out

Fuel Tank Problem Solver

MAR-K now makes a cross sill for 1947-48 GM trucks that is notched to provide clearance for the fuel tank. If you have a 1947-48 GM short Stepside truck and plan to use the original fuel tank – you need this cross sill! This center cross sill does not bolt to the frame of the truck, but includes all holes for bolting to the angle strips and bedstrips. Constructed of 14-gauge electro-galvanized steel with a 12-gauge reinforcement plate, this heavy-duty part is made by MAR-K in Oklahoma City, USA. MAR-K manufactures a wide assortment of cross sills for GM, Ford, and Dodge trucks along with many restoration and custom bed parts. For further information, contact MAR-K Quality Parts at 405-721-7945, or visit

AMSOIL's Reformulated Silicone Spray

AMSOIL Silicone Spray has recently undergone a reformulation and packaging redesign. The product is delivered by means of an aerosol spray that effectively lubricates and protects non-metal surfaces with a dry lubricating film, making it ideal for applications that may be damaged by conventional lubricants such as grease or oil. AMSOIL Silicone Spray provides outstanding protection where light-duty or silicone lubricants are recommended, including rubber, plastic, nylon, upholstery, vinyl, wood, cardboard and other nonmetal surfaces. Silicone Spray's special non-staining formula is also excellent for waterproofing and protecting leather boots, shoes, jackets, suede, and more. It leaves a clear, odorless film and locks out water while keeping applications contaminant free. For more information about AMSOIL synthetic motor oils and performance products contact your nearest AMSOIL distributor, or call AMSOIL at 800-777-8491, or go to

New CPP 500 Series Power Steering Box

Classic Performance Products' 500 Series Boxes for 1967-'87 C10 and C20 Chevy Trucks (#CP50014) are available now. 500 Series boxes are a great performance upgrade for the factory power steering box or an easy way to upgrade your truck from manual steering to power steering. CPP's 500 Series boxes are manufactured using all new components, not remanufactured ones like many on the market today. The 14:1 sport-ratio adds a new dimension of handling to your truck. CPP has tuned the torsion bar and valve for smooth operation and excellent road feedback. They also work with factory power steering pitman arms and 3⁄4-30 rag joints, as well as the popular 7⁄16-inch tube size (11⁄16-18 inverted flare) pressure and 3⁄8-inch tube size (5⁄8-18 inverted flare) return port fittings. Classic Performance Products, Inc. has been providing top-quality steering, brake, and suspension components for classic Chevy and Ford cars and trucks for over two decades. Call 800-830-1724 and order a catalog, or check out

Headers for LS1/LS6 Swaps in Chevy C10s

Patriot Exhaust Products has recently introduced an LS1/LS6 “Clipster” style header for the popular 1973-'87 Chevrolet C10 pickups. Header part number H8087 uses longer 1¾-inch primary tubes, which results in more horsepower and torque when compared to tight-tuck or block-hugger styles. These headers will accommodate stock factory steering setups, and most aftermarket conversion suspensions as well, and can be used with most aftermarket motor and transmission mounts designed for the LS1/LS6 engine transplant like Patriot's own SK100 mount kit. Extra ground clearance makes “slammed” trucks drivable and above framerail exhaust system installation easy. Headers come with welded oxygen sensor bungs in the collectors for fuel injection applications. Part number H8087 comes with a raw finish for individual customizing or with Patriot's very popular polished high-luster metallic ceramic coating for increased resistance to corrosion and thermal fatigue part number H8087-1. Patriot Headers come complete with high-temp gaskets, header bolts, reducers, and complete instructions. Contact your local performance part retailer or PerTronix customer service at 909-599-5955, or check out