Related Photo Galleries
The Quick Time scattersheild was then temporally installed and all the bolts were
tightened down to 25 lb-ft. John then measured from the teeth of the pressure
plate to the matting surface of the Quick Time scattershield. It is recommended
that the pressure plate fi ngers to throwout bearing gap should be around 0.002-
0.004. If not, an additional spacer may need to be ordered. Your stock truck
bellhousing may or may not work with the TKO. An optional bellhousing is available.
Your stock clutch linkage will work with the TKO however a different clutch fork
may be required.