Speedway Motors’ Bolt-In IFS

Declare your independence from outdated buggy-spring front suspensions with the new Bolt-In IFS Crossmember for ’35-40 Fords from Speedway Motors. Speedway Motors’ new crossmember allows the average enthusiast to install a proven Mustang II-style independent front suspension using only basic handtools. The innovative crossmember design employs interlocking boxing plates to support the framerails from the inside, distributing the load and providing the ultimate in strength and rigidity. Mounting bolts pass through both the frame and boxing plates, tying all the components together into a reinforced assembly that will not twist or flex. Installation can easily be completed in a weekend using little more than a socket and wrench set, jack stands, hand drill, tape measure, and a few clamps. No welding or specialized fabrication skills are required. Once installed, the adjustable upper spring seats allow precise tuning of the vehicle’s ride height. Optional bolt-in engine mounts (available for small-block and LS Chevy, or small-block Ford V8s) make engine upgrades easy, too. The Bolt-In IFS Crossmember for ’35-40 Fords is part of an ever-expanding line of specialty street rod, muscle car, and classic truck products from Speedway Motors, America’s Oldest Speed Shop. Call today toll free at 800-979-0122 or visit www.speedwaymotors.com.

S-Drive Billet Serpentine Pulley Systems

Eddie Motorsports has recently introduced their new line of S-Drive billet aluminum serpentine pulley systems. The compact S-Drive features pulleys and mounting brackets that are CNC machined from 6061-T6 aluminum and are available for LS, big-block, and small-block Chevrolet engines. The kits are available in configurations with or without power steering and/or air conditioning. The S-Drive pulley systems include all of the necessary pulleys—in billet aluminum—and stainless steel fasteners, as well as the highest quality, name-brand components including Edelbrock water pump, Powermaster 105-amp alternator, Gates tensioner, and six-rib serpentine belt. Sanden A/C compressor, Maval P/S pump, and ATI dampers (LS engines only) are also included where applicable.

Eddie Motorsports billet aluminum S-Drive pulley systems are a great complement to their line of billet aluminum accessories and engine dress-up parts. For more info contact Eddie Motorsports at 888-813-1293 or on the web at www.eddiemotorsports.com.

Turn Signals Made Easy

Hotronics ensures you never forget to turn off your signals with the new “Full-Feature” Self Canceling Turn Signal system. Compact electronics work on adjustable time programs. When the program ends, the light stops flashing. Adjustable from 20 seconds to a maximum of 2 minutes, the kit comes in your choice of toggle or pushbutton activation. The system requires no relays and they come completely pre-wired with flasher, fuses, and switches for a fast, easy installation, plus they are compatible with all 12-volt negative-ground vehicles and work both bulbs and LEDs. Full-Feature turn signal systems are designed for early cars and trucks that do not have turn signals in the column. They work front, dash, and rear signals and have built-in brake circuit separation, side to side cancelation, emergency four-way flashers and also have a manual override for lane changes, all at a cost much less than that of a new column. Quick, reliable, easy to install, and made in USA! For more info on this and the complete array of Hotronics products call ’em at 714-971-8543.

Positive Protection with Express Sleeves

Thermo-Tec’s new Express Sleeves are exactly what customers have been looking for in terms of heat protection and improved performance for a variety of wires, hoses, and/or cables. The new, easy-to-use sleeving combines a high-temperature insulation material and a highly reflective mylar foil with a Velcro closure. The sleeving is designed to provide maximum protection for wires, hoses, and cables from the very damaging effects of radiant heat. Simply pull apart the material, wrap around the component, and reclose the sleeving. Express Sleeves reflect over 90 percent of radiant heat, is fireproof and fire resistant, and just looks good. Express Sleeves come in two diameters, ½- and 1½-inch, and come in 3-, 12-, and 50-inch lengths. Call Thermo-Tec for details at 800-274-8437 or visit their website at www.thermotec.com.