Brothers One-Piece Power Windows - Reduce Wind Noise Photo Gallery
This is the switch that will go into the stock window cranks place. This switch is an extra option from Brothers that will keep the stock look of the door panel and handles. Make a quick template out of paper and transfer it to the door panel. Use a punch and small drill bit to drill the three holes for the switch mounts. In my case I had extra material that I needed to file away in order to mount the switch smoothly on the inside of the door. Connect the wires from the kit to the switch and take the two blue wires and connect them to either end of the window motor. Test and make sure they are hooked up correctly.