Edelbrock Performer RPM E-Tec 435 SBC
Edelbrock's Performer RPM E-Tec 435 crate engines deliver up to 435 hp and 435 lb-ft of torque. These 350ci engines are built from brand-new GM ZZ short-blocks with one-piece rear main seals. They feature cast-iron crankshafts and connecting rods with hypereutectic pistons. The Edelbrock Rollin' Thunder hydraulic roller camshaft provides exceptional vacuum at idle for power brakes and other vacuum-powered accessories. Performer RPM E-Tec crate engines are the ultimate powerplant for any muscle car, street rod, or classic truck. The heart of the performance is Edelbrock's Total Power Package combination of Rollin' Thunder hydraulic roller camshaft, Performer RPM E-Tec 170 cylinder heads, RPM Air-Gap intake manifold, and Thunder Series AVS 800-cfm electric choke carburetor. Like all Edelbrock crate engines, these packages deliver a street-friendly balance of broad torque and high-end horsepower on pump gas.

Additional qualities include Edelbrock 1.6:1 roller rockers, MSD Pro Billet distributor, and Milodon oil pan. Options include finish (cast, polished, or EnduraShine) and water pump (short or long). All Edelbrock crate engines are hand assembled by dedicated Edelbrock technicians. Edelbrock always considers custom build requests. Contact Edelbrock direct with requests. Every Edelbrock crate engine is backed by a two-year, unlimited mileage warranty and is built to order.

Features include brand-new GM ZZ short-blocks with four-bolt mains and one-piece rear main seals, up to 435 hp/435 lb-ft of torque, as-cast aluminum, polished, or EnduraShine finishes, and nine different applications available including short or long water pumps, or even none at all. And again, each Edelbrock crate engine assembly features a two-year unlimited mileage warranty.

Edelbrock 347 cid Dual-Quad SBF
Edelbrock's Performer RPM 347 crate engines deliver up to 449 hp and 417 lb-ft of torque. These 347ci engines are brand-new, feature 4.030-inch bore x 3.400-inch stroke combos, and are built from 8.2-inch deck-height Ford Racing Boss blocks, forged steel crankshafts and connecting rods, and forged aluminum pistons. The heart of their performance is Edelbrock's Total Power Package combination of Rollin' Thunder hydraulic roller camshafts, Performer RPM cylinder heads, RPM Air-Gap intake manifolds and dual Thunder Series AVS carburetors. Like all Edelbrock crate engines, these Ford packages deliver street-friendly balances of broad torque and high-end horsepower on pump gas. Additional qualities include Edelbrock 1.6:1 roller rockers, MSD Pro Billet distributors and Milodon oil pans. Both engines feature Edelbrock's exclusive show-quality EnduraShine-finished Elite Series valve covers, intake manifold, carburetors, and water pump with polished finished cylinder heads. They are also offered in your choice of oil pan style (front or rear sump). All Edelbrock crate engines are hand assembled by dedicated Edelbrock technicians. Edelbrock always considers custom build requests. Contact Edelbrock direct with requests. Every Edelbrock crate engine is backed by a two-year, unlimited mileage warranty and is built to order. Features Include brand-new Ford Racing Boss blocks and rotating assemblies, up to 449 hp/417 lb-ft of torque, EnduraShine finished valve covers, carburetors, and water pumps, and applications available in either front or rear sump oil pans.

Edelbrock
310-781-2222
www.edelbrock.com

The X302 Hits The Spot
Ford Racing introduces its best value in 302ci crate engines, the X302 (PN M-6007-X302). The X302 features forged pistons and high-performance aluminum cylinder heads at a great price. This combination delivers 340 hp and 310 lb-ft of torque. The X302 ends up at 306 ci utilizing a 4.030-inch bore x 3.00-inch stroke in a seasoned 302 block. Other specs and features include a 9.0:1 compression ratio, a cast-iron crank, I-beam connecting rods, and forged pistons. They're also equipped with aluminum FRPP X-306 cylinder heads with 1.94 intake and 1.54 exhaust valves, and 64cc chambers, hydraulic roller E303 camshafts, 50-ounce harmonic balancers, water pump, distributor, ignition wires, and intake. The X302 also features Ford Racing's standard 12/12 FRPP crate engine warranty. The X302 is topped off by a set of Ford Racing polished aluminum valve covers and is ideal for classic trucks, street rods, kit cars, or any performance project for that matter. Plus they're built right here in the USA!