Eastwood is proud to announce the launch of their affordable industrial quality line of MIG welders. Their program is going to start with a 110-volt input, 135-amp MIG welder as well as a more robust 220-volt input, 175-amp MIG welder that includes a free spool gun to allow the welding of aluminum. Eastwood is warranting each welder for three years and, of course, each buyer has full tech and accessory support. Eastwood MIG welders are sold with everything you need to weld (excluding the gas cylinder and helmet). For more details, contact Eastwood by calling (800) 343-9353 or online at www.eastwood.com
Retrosound's latest generation Model One Radio for 2010, is a breakthrough classic car/truck stereo unit now featuring a remote mountable USB and SD card box for MP3 digital file playback in your classic truck! The Model One also features a new more powerful 50W x 4 RMS/100W x 4 max power internal amplifier, front and rear aux inputs for iPod or satellite playback, RF remote control with a 30-foot range for the ultimate hidden install and many more new features! Retrosound has direct fit options available for most all pre-1985 makes and models. For more info, contact Retrosound toll-free at (888) 325-1555 or log onto www.retrosoundusa.com.
Gas And Go, And Go, And Go
Classic Performance Products (CPP) released their new complete line of 20-gallon aluminum gas tanks for classic trucks. These tanks now hold a minimum of 20 gallons and fit '48-60 Ford and '47-59 and '63-72 Chevrolet pickups. CPP's tanks are fully baffled and carburetor or fuel injection ready. CPP's lightweight tanks are manufactured from 1/8-inch-thick aluminum with strong 3/16-inch-mounting flanges. Each tank is available in side or top fill and includes mounting hardware, fuel fittings, and easy-to-follow instructions. For more info, contact Classic Performance Products at (800) 830-1724 or online at www.classicperform.com.
Chrome Might Just Get You Home
Stromberg Carburetor is very proud to announce its new Genuine 97 carburetor in a chrome finish. The high-quality zinc alloy Genuine Stromberg 97 castings are hand polished before any passivation, then copper plated, buffed again, and then chromed before a finish detail polish to add great color and depth. All of the carburetor's stainless parts including linkage and choke plate are hand polished before any sub-assemblies are completed. The base castings are supplied in the usual Stromberg high-quality black lacquer finish. The final result is a real show-quality chrome product with a full warranty. For more information about Stromberg Carburetor, including dealers in your area, log onto www.stromberg-97.com.
Old Is New
New Vintage USA is introducing their new vintage inspired line of instruments called The Woodward Series. This line of gauges was created to be appropriate for vehicles from the 1930s through the 1960s. The 5-inch gauges incorporate styling features from years gone by with an inner bright-plated accent ring, a cover bezel on the quad gauge, and large wraparound numbering with stylized hash marks. Modern features, such as a remote button activated programmable speedometer with an hour meter and modern air core movements, hide behind the domed glass lenses. The gauge sets are available in several colors and configurations and all components are made in the USA and feature a manufacturer's limited-lifetime warranty. For more information from New Vintage USA, call (248) 259-4964 or log onto www.newvintageusa.com.
When Crane Cams first introduced its HI-6 multi-spark CD ignition series, it incorporated many important features that set it apart from the competition but these extra improvements necessitated pricing it higher than the competition. And because many enthusiasts bought on price alone, the HI-6 was often not considered, despite its advantages. But that was then, and this is now! Crane's new management has streamlined operations, brought in additional manufacturing technology, and has significantly cut the price of the HI-6 without lessening any of its features or quality. In fact, the unit incorporates several important upgrades. To find out all about it, contact Crane Cams on the web at www.cranecams.com or call toll-free (866) 388-5120.
Rev It Up
During the '60s and '70s, the iconic Sun and Sun Super Tachs decorated the dash of hot rods and muscle cars around the country. Today, that legend lives on as performance parts manufacturer Sunpro introduces their new line of Retro Tachometers featuring the nostalgic styling of the past enhanced by the modern electronics of today. Both Retro Tachs have vibration-proof air-core meter construction to ensure accuracy and reliability with fast needle response covering the 0-8,000 rpm range. They also feature all-metal housings with removable chrome metal cups and include two mounting brackets for positioning on either the dash or the steering column. For more details, contact Sunpro by calling (800) 228-7667 or visit www.sunpro.com.
Put Your Foot Down
If you have a classic Chevy or GMC truck that has a stock rubber floor mat that has seen better days, do yourself a favor and get a new one from Brothers Trucks. Brothers reproduction rubber floor mats are identical to the factory-style rubber mats that came with many '47-87 Chevrolet and GMC trucks. Now you can bring back that factory fresh look and feel by replacing your old worn-out, tattered, or missing floor mat with one of Brothers high-quality replacements. For ordering information, call Brothers Trucks toll-free at (800) 977-2767 or go to www.brotherstrucks.com.
You asked for it and Wheel Vintiques has delivered, the new eight-lug OE wheel is here! The 8 on 6.5-inch bolt pattern is available in a 16-inch diameter only with widths ranging from 6 all the way up to 10 inches. All standard and most custom offsets are also available for your Ford and Chevy 3/4-ton and 1-ton pickups. Baby moon-style caps are also available to dress your heavy hauler. For more information contact Wheel Vintiques Inc. at (559) 251-6957 or online at www.wheelvintiques.com.