Roll-Y Pulley
Concept One has extended its pulley systems to include a new compact and stylish line for the venerable Ford Cleveland 351 engine. Providing a choice of four systems for the Cleveland, they range from a basic alternator-only pulley kit to a full option solution with alternator, air conditioning compressor, and power steering mechanism. These kits comprise of all associated pulleys, brackets, belts, and chrome hardware. In addition, a polished compressor and alternator and an aluminum power-steering pump are supplied together with Concept One's exclusive power steering reservoir to complete the package. For further options and info, contact Concept One at 770-889-5900 or www.c1pulleys.com.

Beef Up Your Bottom
Jim Meyer Racing Products has been making rearend kits for any truck for over 20 years, and now you can get a new 9-inch rearend any width designed to fit your 'rails. The four-link rearend kit will eliminate axle housing windup and provide great handling, stability, traction, and improved launches. Corner carving antisway bars are optional. You'll get a narrowed housing with matching Dutchman alloy axles, adjustable Panhard bar, aluminum adjustable coilover shocks, and urethane-bushed adjustable four-link bars with a forward crossmember. All brackets are jig-welded to the housing and crossmember so you can weld it in and bolt it together in the driveway on a weekend. See it all on their website. For more info, contact Jim Meyer Racing Products at 800-824-1752 or visit them online at www.jimmeyerracing.com.

Cruise In Comfort
Whether you're getting chills up your pant legs or your feet are on fire when driving your classic Chevy truck, Chevs of the 40's can help ease the suffering from climate extremes with their new firewall pads for '47-50 Chevy trucks. These new stock reproduction firewall pads not only look good and are affordable, they are also easy to install. For more details and parts for your truck, contact Chevs of the 40's by calling toll-free at 800-999-CHEV (2438) or visit www.chevsofthe40s.com.

The Angle Just Got A New Dangle
When it comes to finishing the interior in a classic truck, Juliano's specializes in supplying the finer detailing components-like these adjustable floor mounts for any angle. The Easy-Angle Floor Mounts come in several sizes to accommodate steering columns with tube diameters of 11/2 to 23/8 inches. The center of the unit swivels to accommodate any mounting angle, and they are split and pinned for easy assembly and perfect alignment around your column. Once installed, the column is completely watertight. You can opt for the round or slim-line style (both shown here), and either one can be ordered with or without a shift rod hole. They come in a polished or satin finish, and can also be painted. For more information, call Juliano's toll-free at 800-300-1932 or visit them on the web at www.julianos.com.

Loads Of LS Power
Late-model GM LS engine enthusiasts can now take the guesswork out of adding horsepower to their LS2 engines with Trick Flow Specialties' new Top-End Kit for GM LS2 applications. The kit is specially designed by the experts at Trick Flow and dyno-proven to deliver big power gains for less than the cost of purchasing the individual components separately. The kit is built around Trick Flow's GenX Street/Strip CNC-ported cylinder heads. Trick Flow engineers modified the valve angles to decrease valve shrouding, increase mid-lift airflow, and improve rocker-to-valve cover clearance. The kit also includes a specially matched hydraulic roller camshaft designed to boost power in the 3,000-7,000 rpm range and a set of roller rockers to reduce friction and increase valvetrain stability. For complete details, contact Trick Flow Specialties by calling 330-630-1555 or visit them online at www.trickflow.com.

Rally The Rings
The GM Rally wheel is one of the most widely used steel wheels, symbolizing the early muscle car popularity of the Corvette, Camaro, Nova, Chevelle, and of course, classic trucks. Stockton Wheel Service makes it easy to give your GM Rally wheel the look you need and the attention your truck deserves with a complete line of polished trim rings. Stockton Wheel's trim rings are available in a highly polished stainless steel finish, and come in a variety of rounded- or flat-lip styles and widths that fit OEM 14- to 17-inch Rally wheel sizes. You can use Stockton's line of trim rings on your original wheels, or on Stockton Wheels' custom Rally wheels that are built to your specific width and backspacing that your vehicle may require. For more information on all of Stockton Wheel's products and services, contact Stockton Wheel Service at 800-395-9433 or visit www.stocktonwheel.com.

Slicker Than ... Well, You Know
With the current government regulations, today's oils are missing many of the critical ingredients needed for engine protection, but the engineers at COMP Cams and Endure Performance Lubricants have been working hand in hand at developing a full line of automotive lubricants to fill this void. The first being the ZDDP-enhanced Engine Break-In Oil that provides maximum protection during initial engine break-in. Heavily tested and proven by the COMP Cams R&D team, this advanced lubricant provides maximum engine life while also allowing it to reach its full performance potential. It does so by improving the surface mating of valvetrain components (especially flat tappets), rotating assembly, rod journals, piston rings, valveguides, and other vital areas of the engine. For complete details, visit COMP Cams via their website at www.compcams.com or call 901-795-2400.

Get Decked!
Bed Wood and Parts has developed a complete bed wood kit that will outfit any truck with a steel bed floor with the quality and good looks of wood. Their RetroLiner is available for most pickups and is a complete floor covering system that requires only one tool, which is included. The RetroLiner converts any steel floor truck bed to a classic and durable wood surface without damage to the original steel or any cutting or grinding. Each of the RetroLiner kits is custom-built to order and precision cut to exacting tolerances thanks to its CAD. They are made in America and constructed for the utmost in style and durability. For more info, contact Bed Wood and Parts at 877-206-9663 or visit them online at www.bedwoodandparts.com.

Not So Lost In Space-ERS
Check out these gorgeous new '64-73 Ford fan spacers. At 21/4 inches long they are vital for keeping your fan blades close to the radiator, where they can do the most efficient job of drawing cool air through the core. This spacer is a reproduction of the OEM Ford factory unit, and will look great on the Ford engine in your truck. Each is precision made by Scott Drake Enterprises from billet aluminum and available in either original-style natural finish or brightly polished for that high performance or show look. To find out more, contact Scott Drake Enterprises online at www.drakeoffroad.com or call 800-999-0289.

  • «
  • |
  • 1
  • |
  • 2
  • |
  • View Full Article