Classic Trucks Homepage Classic Trucks
Facebook Click here to find out more!

Removing The Front Shackles

 
 
Removing The Front Shackles
Removing The Front Shackles
The front shackles need to come apart so the springs can come out. There are nuts on the end of each threaded pin that go in the spring eye and the threaded bushing in the chassis. Support the spring pack, remove the nuts, the sides of the shackles, and lower the spring pack. View Related Article
1955 Chevy Truck Side View Monoleaf Upgrade Leafspring Hardware 1955 Chevy Truck Side View Cut Up Leafsprings Pulling Out The Drop Axle Removing The Front Shackles
Thread Bushing Installing New Thread Bushings Threaded Up Pin New Threaded Bushings New Caster Shims Shims Between The Axle And The Monoleaf Blown Out Air Shocks
Shackles Installed Wrong Front Mount Of The Rear Springs Hole In The Running Board Sliding Main Monoleaf Pin Out Greasing Rear Shackle Mounts Bolts Rear Monoleaf Shackle Setup Measuring The Rearend
Checking Pinion Degrees Performance Online Rear Flip Kit Jacked Up Chevy 10 Bolt New U Bolt Plates Installing Allen Bolt Installing 1 Inch Lowering Block 1955 Chevy Truck Front View
Classic Trucks
Classic Trucks