Stainless Works Custom Exhaust System Install - Bumpside Build-On
|
Here are all the parts from Stainless Works I'll be using to build the exhaust system for the '68 F-100. Their 2-inch butt-weld Rod Builder Kit contains all the general pieces of tubing needed in the form of four 48-inch straights, four 180-degree U-bends, four 90-degree elbows, and four 45-degree bends. I picked the inlet and outlet location on their straight-through turbo mufflers and added enough hangers and flanges to connect to the headers. View Related Article
|
|