|
|
1955 Chevy Cameo Auto Body Repair - Bodywork Basics, Part 3
 With a red fine-tip marker,...  With a red fine-tip marker, Butch traces the outline of the taillight bezel along the mounting surface. The side of the bed will need to be sanded down enough to make that line disappear. |  Finally, with all the planes...  Finally, with all the planes up to par, the once sharp edges are lightly knocked down and given a nice, soft, rounded edge. |  With the bedside "roughed"...  With the bedside "roughed" in (flat and aligned, but still needing some hours of blocking), Butch lays down a few coats of primer. |  Though there's still plenty...  Though there's still plenty of work to be done before any real paint can be applied, at least the body lines have been established, leaving only the tedious chore of further block-sanding-but that's just one side of the bed. There's still the rest of the truck to go! |  Above is the untouched bedside-notice...  Above is the untouched bedside-notice the uneven spine in comparison to the freshly bodyworked side... |  ...(below). Big differenc...  ...(below). Big difference. |
Discuss in Our Forums
GMC Yukon Research
With great deals and authoritative reviews, find all you need to research and buy the new GMC Yukon, as well as compare it with other vehicles to help you in your car buying process. The 2010 Yukon has comparable mpg, and is available in the following bodystyle: SUVs. The Ford F350 and the Ford F150 are other vehicles that might interest you.
|
|
|
1957 Chevrolet Cameo - Take Two
If you've ever spun a wrench on a classic truck project, you know what it's like to have visions of the finished product dancing in your head. You may be staring at a pile of crusty old parts, but in...
more
|
|
|
1958 Chevy Cameo - A Rare Cameo Appearance
Midyear in 1958, Chevrolet Motor Division replaced the stylish Cameo pickup with the all metal Fleetside model. By the time of this changeover, a scant 1,405 Cameos had rolled off the GM assembly...
more
|
|