I've said it before, and I'll say it again-rust sucks! I can't tell you how many times I've shied away from parts or even complete projects because of it. I hate dealing with rotted metal, no qualms about it. However, I'm not alone, as many others share my sentiments. Fortunately, some of those people have taken the time and effort to not only do something about curing the cancerous woes, but to actually develop products and methods to help others experiencing the same struggles.
Now, thanks to KBS Coatings, people like me can breathe a breath of fresh, rust-free air. With their comprehensive three-step Oxygen-Block System, you can give new life to old, deteriorating metal, from chassis to floorboards and pretty much everything in between. Easily stop rust in its tracks and renew fatigued metal surfaces with a variety of finishes. For frames, the BlackTop Chassis Coater provides an OE-like satin black look, while the company's popular RustSeal is available in black, silver, red oxide, off-white, and even green, all of which can be top-coated on exterior surfaces with your choice of sealer to provide proper UV protection.
Basically, what you want to do is not only stop rust dead in its tracks, but also keep it from returning. In order to accomplish that, you need to remove the key elements that are feeding its current existence: water and oxygen. While simply covering surfaces with a high-grade sealing agent can and often will deter further corrosion, to completely cure the problem, you need to thoroughly prepare affected surfaces prior to sealing. With KBS' AquaKlean and RustBlast-both water-based agents-followed by RustSeal, you can kiss rust goodbye forever.
Even if you've never prepped raw metal surfaces before, AquaKlean and RustBlast couldn't be simpler to use. For heavily rusted/corroded areas, you'll need a good wire brush or a wire wheel attachment for your electric grinder, and, of course, the proper safety equipment, such as gloves and protective eyewear. Treat the preparation process as you would bodyworking a quarter-panel or a fender: the better the underlying work, the better the end results.
 | 
KBS Coatings' comprehensive Oxygen-Block System consists of AquaKlean and RustBlast to clean and prep, and RustSeal and BlackTop to seal and protect. Both finishes are available in pint, quart, and gallon sizes to accommodate jobs big and small. |
Rust loves to hang out everywhere, especially where it's least likely to be discovered for quite some time-on your chassis. Fortunately, the metal's thick and not too prone to cancer (well, not usually); unfortunately, you gotta pull your cab and accompanying sheetmetal to treat it. | |