1968 Ford F-100 - Bump Side Build-Off - Tech
|
Next, with the brake pads in place, mount a caliper on the caliper bracket. Make sure to use the correct side and that the bleeder screw points up. The mounting bracket will go between the mounting tabs on the caliper itself. Turn the rotor and check that nothing is binding or out of place. Now, mount your wheel and tire on the hub, taking care not to scratch it, and before turning it, check that nothing is touching it. If not, then give the wheel a slow spin. When everything passes the test, you can disassemble it and paint or chrome whatever you want. I am a bad example and didn't have my wheels on hand for this since they are awaiting production, but I will follow these steps when they arrive! View Related Article
|
|