Classic Trucks Homepage Classic Trucks
Get Adobe Flash player

Truck Cleaning - It's All In the Details

Listen To Mothers...Keep Your Truck Clean
By Rob Fortier
Claying And Waxing A Truck
Ah, the wonderful polished aluminum wheel. While giving practically any vehicle new life, the addition of fancy rollers also adds an extra chore in the upkeep department, one that few look forward to. Now, thanks to Mothers FX Wheel Cleaner and PowerBall polishing attachment, that chore's a breeze. Used with conjunction with Billet Metal Polish and FX Tire Shine, your pricey investments can look accordingly in no time.
Claying And Waxing A Truck
Unlike many spray-on, wheel-cleaning concoctions of the past-which often ate into polished finishes-FX Wheel Cleaner is safe for all wheel types. Just spray onto a dry wheel and allow to penetrate for a few minutes.
Claying And Waxing A Truck
After allowing time for the cleaner to do its job, simply wipe down with a wet sponge or cloth and rinse.
Claying And Waxing A Truck
For wheels requiring only minor cleanup, just hit with a hose and watch the dirt disappear.
Claying And Waxing A Truck
After the cleaning is complete, thoroughly dry the wheels; you can even use an air nozzle to get moisture from tight spots. Once dry, it's time to put the PowerBall to the test with your cordless drill. Using the same amount of polishing compound (Billet Metal Polish) as you would by hand, let the tool bring that aluminum back to life, instead of using your fingertips.
Claying And Waxing A Truck
One of the many advantages of the PowerBall is the ability to get into tight corners and crevices with ease.
Claying And Waxing A Truck
You'll know the attachment's doing its job simply by the immediate discoloration from the aluminum. Now, your better half won't be screaming at you for using old socks or underwear that weren't quite ready for retirement yet!
Claying And Waxing A Truck
Before enjoying the fruits of your lightened labor, hit the tire's sidewall with a dose of FX Tire Shine for a perfect, complementing finish. Thanks to a special UV protection, the dressing won't brown or fade.
Claying And Waxing A Truck
Now you're remembering why you gave in and splurged on a nice set of wheels-cuz they look good on your truck, especially when the shine like this.

1  | 2  | Next

Discuss in Our Forums
GMC Yukon Research
GMC Yukon With great deals and authoritative reviews, find all you need to research and buy the new GMC Yukon, as well as compare it with other vehicles to help you in your car buying process. The 2009 Yukon has fuel economy of 12 mpg, and is available in the following bodystyle: SUVs. The Ford F350 and the Ford F150 are other vehicles that might interest you.
Claying And Waxing A Truck  Claying And Waxing A Truck
Claying And Waxing A Truck  Claying And Waxing A Truck
 
TIG Welding Basics DVD Review - Professor Hammer's Metalworking Tips
Read the wonderful reviews that Ron Covell's TIG Welding Basics DVD received and how it could benefit you.... more
 
Motorbooks Authors Honored For Excellence At International Automotive Media Awards
Motorbooks authors Ken Gross and Eric Arneson honored for excellence at International Automotive Media Awards.... more
 
Classic Truck Vin Number, Engine & Fuel Tank Help - Postage Paid
Rob answers some of the questions you write in with. We tackle VIN number location, engine help and tips on where to put a fuel tank at.... more
 
Classic Truck Parts - Parts Department
New Classic Truck Parts from Chevy Of The 40s, Total Cost Involved, COMP Cams, Wheel Vintiques, Performance Online, Mothers and The Eastwood Company.... more
 
1947 Chevy Project Truck - Driver's Seat
Rob talks about his new 1947 Chevy project truck and how you can build a 47-53 truck from scratch.... more
 
1968 Ford F-100 Patch Panel Installation - The Bumpside Build-Off
Check out this 1968 Ford F-100 as we perform a step by step patch panel installation!... more
 
1955 Ford F-100 Pickup Truck - Garage Built?
Check out Gary Schultz 1955 Ford F-100 which he built alone from his garage.... more
 
Ford Racing Performance Parts New Engine Harness - Bumpside Build-On
Ford Racing Performance Parts has a new stand alone wiring harness for 2005-2010 4.6L SOHC V-8 engine which we are using to hookup a 2008 4.6L SOHC V-8 engine that will run in our 1968 Ford F-100.... more
 
Metalworking Frequently Asked Questions - Professor Hammer's
Read all about the best ways to clean old metal in preparation for advanced metal working and other frequently asked metalworking questions.... more
 
The Eastwood Company's New Website
The Eastwood Company has redesigned they website for a more easier and user friendly experience.... more