 Keeping up your truck's appearance...  Keeping up your truck's appearance can turn into an all-day deal. With Mothers on your side, not only is the time cut considerably, but the effort put forth by you, too. The Clay Bar Paint Saving System is just another way that you can maintain your truck's finish without spending a lot of money...or time. |  The Clay Bar kit comes complete...  The Clay Bar kit comes complete with everything needed to rid your paint of buildup that regular washing can't. To keep the clay lubricated and allow it to lift the contaminants embedded within, use the supplied California Gold Showtime Instant Detailer. |  As long as you keep the surface...  As long as you keep the surface of both the clay and the paint wet, you'll literally feel the crud lift as the effort becomes easier and easier, the paint becoming smoother and smoother. |
 Just flip the clay over after...  Just flip the clay over after a few passes, and then you'll see the lifted crud buildup that was once the main contributor to your paint's dulling finish. |  After hitting each section...  After hitting each section (attack surfaces in small areas), immediately wipe down with a clean, soft cloth like Mothers MicroFiber cloths. |  Though the Clay Bar is not...  Though the Clay Bar is not harsh to paint like coarse compounds, you'll want to be careful around areas like this. |
 Pinstriping on top of clearcoat...  Pinstriping on top of clearcoat will end up on the clay, right along with the dirt and debris if you're not cautious. |  The Clay Bar kit also includes...  The Clay Bar kit also includes a finish wax, but because this particular surface was seemingly beyond repair, the entire three-phase Mothers wax process was used, starting with the Pre-Wax Cleaner and followed by Sealer and Glaze. |  With each phase in the wax...  With each phase in the wax process, a clean applicator was used. Like final wax, each was left to haze up in shade or indirect light before being buffed off with a clean, soft cloth. |
 Have patience and apply all...  Have patience and apply all the needed elbow grease and your--left for dead paint--will slowly but surely come back to life. Stay with us as we round the bend on our Mothers paint resurection project. |  Finally, the supplied Carnauba...  Finally, the supplied Carnauba Wax was applied to the treated area. After it was buffed off by hand, the once-dull and rough surface was now shiny and smooth... |  And this was on a paint finish...  And this was on a paint finish that was all but left for dead, which means even the average "nice" paint job will benefit greatly from a clay job! |
 If you're unsure if the Clay...  If you're unsure if the Clay Bar Paint Saving System is for you, try this simple test. The next time your wash your truck (or car), run your hand over the hood or roof. If you feel any resistance from the paint (inconsistency from debris) at all, it's clay time! | | |