Classic Trucks Homepage Classic Trucks

Ford 9 Inch Rearend

Before sliding the Moser axle in place-make sure you have all the necessary brake equipment on first like backing plates or in our case the Wilwood caliper mounts/E-brake assembly. Then with a small amount of grease on the splines of the axle and the outside of the sealed bearing-carefully guide the axle into place making sure it seats all the way into the third member.
Ford 9 Inch Rear End - Tuff as Nails!

 Before sliding the Moser axle in place-make sure you have all the necessary brake equipment on first like backing plates or in our case the Wilwood caliper mounts/E-brake assembly. Then with a small amount of grease on the splines of the axle and the outside of the sealed bearing-carefully guide the axle into place making sure it seats all the way into the third member.  View Related Article

 

Get Adobe Flash player

Car Research Guide