Project Old School: Shifting Into Overdrive
|
The cable was secured at the trans, and the base plate bracket was installed under the carb. The cable was snapped into the bracket and linkage adapter, and then the cable length was set by depressing the lock on the cable and opening the throttle fully. Then the cam can be adjusted to fine-tune the timing and firmness of the shifts and downshifts. (For a more in-depth look at how this system works check out our July '03 issue or visit the technical articles section of our Web site, www.classictrucksweb.com/tech/0307cl_cable/) View Related Article
|
|