Classic Trucks Homepage Classic Trucks

0412cl Trans 25 Z

Alan measured and marked for the shifter hole by measuring from the back of the block and a seam in the floor. He then used a small hole saw to make the first cut. Slowly the hole was enlarged with a body saw and cut-off wheel until the shifter fit through the floor with no obstructions.
Project Old School: Shifting Into Overdrive

 Alan measured and marked for the shifter hole by measuring from the back of the block and a seam in the floor. He then used a small hole saw to make the first cut. Slowly the hole was enlarged with a body saw and cut-off wheel until the shifter fit through the floor with no obstructions.  View Related Article

 

Get Adobe Flash player

Car Research Guide