Independent Thinking Part 2
|
In order to bolt the upper shock mount to the framerail Mike had to measure forward from the rear axle centerline 3 1/8 inches and 6 3/8 inches. There were stock holes at these locations that needed to be drilled out to 3/8 inch. The upper coilover shock mount was bolted on the framerail using these holes and the bolts supplied with the kit. Using the bracket as a template, Mike center-punched the upper two bolt holes on the frame and then drilled them out to 3/8 inch and installed the two upper bolts. View Related Article
|
|