Midyear in 1958, Chevrolet Motor Division replaced the stylish Cameo pickup with the all metal Fleetside model. By the time of this changeover, a scant 1,405 Cameos had rolled off the GM assembly line. The new Fleetside, with an all-metal bed, made the Cameo somewhat redundant, likely because the stylish Cameo was a combination of metal and 'glass, making it less desirable. However, over the decades to follow, all the Cameo models of '55-'58 became very collectable vintage pickups.
Chevrolet Cameos were produced...
Chevrolet Cameos were produced from 1955 through mid-1958. Always considered rare, well-styled pickups, the '58s were the least produced of the marque. Only 1,405 '58 Cameos rolled off the assembly line before being replaced by the Fleetside model.
Denise and Rick Spillman of Olympia, Washington, had been searching for a Cameo over a four-year period. Once in awhile, they stumbled across a '55-'57, but never a '58. They preferred the quad headlight nose of the '58 model. When they eventually learned about the low production figures for the '58, the search was on.
One sunny spring day in May of 2002, an eBay web surf expedition proved fruitful. They discovered a bright-red, four-eyed Cameo residing in Texas. After an abundance of long-distance phone calls to the Lonestar State and pouring over numerous mailed photos of the Cameo, the Spillmans bought the truck without seeing it in person.
Though the Chevy was a solid driver, the new caretakers wanted both a show and a go machine. Hence, they sliced off the stock Chevy front end and welded in a '78 Camaro Z28 front clip with power steering. Rick's brothers, Don and Kent, own Big Boys Toys, a street rod shop in Yucaipa, California. They installed a chrome '69 Jaguar IRS. Sized 16x8 inches at each corner and covered with Goodyear radials, Rick replaced the factory rolling stock with American Racing Wheels Torq-Thrust IIs. Camaro Z28 front ventilated disc brakes and Jaguar rear discs now slow down the 3,600-pound hauler much better than the original hydraulic drums. Rick constructed a stainless steel 24-gallon fuel tank, then located it behind the Jaguar IRS.
With speed shop components...
With speed shop components such as Edelbrock, Crower Cams, World Manufacturing, and Holley, Rick Boyd crafted a 355ci Chevy drag racing motor that dynos out at an impressive 425 hp.
Without a shiny new engine, the Bow Tie would be sentenced to a life of street duty only. Fortunately for the Spillmans, friend Rick Boyd, of Olympia, Washington, had recently built a 355ci Chevy motor for drag racing that he was willing to part with. Through the careful construction of the proper components, such as World angle-plug 202 heads, forged TRW pistons, Speed Pro rings, a Crower camshaft bumping solid lifters, an Edelbrock Victor Jr. aluminum intake manifold, a Holley 750-cfm carburetor, and a K&N air filter element, dyno'd horsepower is 425 at a 10.5:1 compression. With the addition of a K&N billet aluminum air filter housing and GM cast-aluminum valve covers, the engine looks as good as it performs.
Bucket seats from a '78 Mercury...
Bucket seats from a '78 Mercury Marquis were trimmed in charcoal and gray tweed fabric.
Sure, the need for speed and power is important, but so is a resonant exhaust note. Rick entrusted Vick at Quality Muffler, in Olympia, Washington, to install a set of Dynomax mufflers, tips, and a exhaust system with a set of Doug's headers. B&M Racing & Performance Products enhanced the TH 350 transmission by installing a 3,200-stall converter, as well as a Hayden Automotive tranny cooler.
Upon installation of the stout drag racing engine, the red exterior was less than perfect. As the owners desired a show-worthy driver, they decided to have the entire exterior repainted in bright red and bright white. Rick selected Bernie's Custom Paint, in Olympia, Washington, for the job. Bernie's stripped the finish, shaved the hood and fenders, and laid down a Bernie's custom blend of '03 Corvette Torch Red and White paint. The Cameo spent a total of eight weeks at the painters, before Rick installed a stainless steel bed floor, separated by red-painted stringers.
The only two elements that...
The only two elements that aren't stock in this '58 dash are the aftermarket AM/FM radio and the Hot Rod Air HVAC system.
Despite the fact that the interior had all been redone to factory-new condition, Rick removed the original bench seat and replaced it with '78 Mercury Grand Marquis power bucket seats. Another friend, Dennis Goetz of Dennis Goetz Upholstery, of Olympia, Washington, trimmed the buckets and interior with gray and charcoal tweed fabric. Dennis also replaced the factory rubber mat with charcoal wool carpet. The steering wheel and dashboard instruments were left stock. Climactic cabin comfort was enhanced via a Hot Rod Air in-dash HVAC system.
After 11 months of effort by the Spillmans, their friends, and several craftsmen, the four-eyed Cameo had a new lease on life. One of the Cameo's first appearances came at the 2004 55th Annual Grand National Roadster Show (GNRS), held this year for the first time at the Los Angeles County Fairplex, in Pomona, California. The prestigious America's Most Beautiful Roadster trophy is presented at the GNRS each year. Magnificent American roadsters play the leading roles at this historic event, while the Spillmans brought their pickup simply to make a rare Cameo appearance. Bravo.
 Per the caretakers' wishes,...  Per the caretakers' wishes, friend and upholsterer Dennis Goetz trimmed the Cameo's door panels and entire interior in gray and charcoal tweed fabric. The floor is charcoal wool carpet. |  Owner Rick Spillman used polished...  Owner Rick Spillman used polished stainless steel panels, separated by Torch Red-painted stringers, for the bed floor. |  Despite the newly applied...  Despite the newly applied bright-red paintjob upon its 2002 purchase, the Spillmans hired Bernie, owner of Bernie's Custom Paint, to strip the truck to bare fiberglass and bare metal, before re-spraying it in two '03 Corvette hues, Torch Red and White. |
 If you owned a Cameo pickup...  If you owned a Cameo pickup in the '50s, you arguably had the most stylish pickup that American automobile manufacturers produced in that era. It's no wonder that automotive collectors clamor for Cameos today. | | |